The Corning disposable spinner bottles are supplied ready to use with stirrer and integrated magnet, eliminating the need for time to assemble or clean and reassemble. An integrated magnet ensures even rotation.
These disposable Corning® Spinner Flask Aseptic Transfer Caps will both reduce contamination and enhance the productivity of your cell culture operations when adding or removing medium and cells. Aseptic Transfer Caps are sterile (10⁻⁶ SAL), ...
Corning disposable spinner flask replacement caps are available separately. Each are provided sterile and individually doubled-bagged. Caps are available for 500 mL, 1L, and 3L flask sizes.
These disposable high density polyethylene sterile vent caps contain a 0.2 µm pore hydrophobic PTFE membrane. They are designed to fit the Corning® 500 mL, 1L and 3L Disposable Spinner Flasks (Cat. Nos. 3153, 3561and 3563) for culture applications ...
These disposable high density polyethylene sterile solid caps are designed to fit the Corning® 500 mL, 1 L and 3 L Disposable Spinner Flasks (Cat. Nos. 3153, 3561 and 3563). They also fit Corning disposable polystyrene and polycarbonate storage ...
Center Cap Assembly for Corning® ProCulture Spinner Flasks is designed for use with direct overhead drive motor. These cap assemblies required optional 8L, 15L or 36L paddle assemblies and can be used on all 4512 series vertical sidearm flasks.
Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 8L Corning® ProCulture Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.
Sidearm fittings for gas handling can be used to provide gases into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with sensor probe fittings and media handling fittings, ...
High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® ProCulture Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350 rpm. The weight of ...
Corning® ProCulture Glass Spinner Flask with Angled Sidearms
Paddle Assembly for Corning® ProCulture Spinner Flask with Direct Drive Overhead Motor
Corning® ProCulture Gas Delivery Fitting with Inlet for Vertical Sidearm Flasks
Sidearm fittings for gas handling can be used to provide gases into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with sensor probe fittings and media handling fittings, ...
Corning® ProCulture Gas Venting Cap with PTFE Filter for Vertical Sidearm Flasks
Corning® ProCulture Probe Insertion Fitting for Vertical Sidearm Flasks. Spare parts for sidearm fittings, see Cat. Nos. 1395-32LTC, 1395-45LTC, 1395-LTR, and 1395LTMC.
Corning® ProCulture Media Handling Fitting with Dual Inlets for Vertical Sidearm Flasks. Spare parts for sidearm fittings, see Cat. Nos. 1395-32LTC, 1395-45LTC, 1395-LTR, and 1395LTMC.
Corning® ProCulture Media Handling Fitting with High Temperature Resistant EPDM O-Ring with Dual 1/4 Inlets for 8L or 15L Vertical Sidearm Flasks.
Spare parts for sidearm fittings, see Cat. Nos. 1395-32LTC, 1395-45LTC, 1395-LTR, and 1395LTMC. Corning® ProCulture Gas and Media Handling Fitting with Dual Inlets for Angled Sidearm Flasks
Corning® ProCulture Gas and Media Handling Fitting with Dual Inlets (1 long, 1 short tube) for Angled Sidearm Flasks. Spare parts for sidearm fittings, see Cat. Nos. 1395-32LTC, 1395-45LTC, 1395-LTR, and 1395LTMC.